Wing P Series Boats

  • Wing hull design creates hydrodynamic lift and compartmentalizes the running surface to reduce vacuum - quicker to plane and greater speeds with heavier loads
  • Large interior space
  • Polyurethane Fabric used throughout for longer life and 2-3 times the puncture resistance of Hypalon or PVC
  • Thermo welded seams for a joint as strong as continuous material
  • Composite transom; lighter weight and stronger than aluminum, will not decay like wood
  • California made with U.S. materials and Berry Amendment compliant
wing p-series CRRC fully infatable boat

Combat Rubber Raiding Craft

Made of Cooley Coolthane® polyurethane fabric, the P Series is stronger and enjoys 2-3 times the puncture resistance of Hypalon and PVC products. Tube seams are heat welded into a single fabric – not glued – forming a joint even stronger than the material itself.

In speed tests with medium loads, each of the P Series boats without speed tubes achieved the same top-end speed as a competitive model with speed tubes. Additionally, each of the P Series throw a smaller wake profile — so clandestine operations stay that way.

As an example: Under light load conditions of 800lbs with a 40hp engine, the P4.7 exceeds 30 miles per hour. It also features 20% more usable deck space than similar-sized competitive models and is nearly 50 lbs. lighter.

  • Hull design creates hydrodynamic lift and compartmentalizes the running surface to reduce vacuum — affording higher running surface to reduce vacuum — affording higher speeds with heavier loads, quicker to plane and greater fuel speeds with heavier loads, quicker to plane and greater fuel efficiency
  • The design of Wing CRRCs without speed tubes out-performs the competition’s boats with speed tubes in a medium load.
  • Interior space of the Wing P-Series is greater than the competitive respective models.
  • Independent tests prove Polyurethane fabric makes a stronger, more durable tube with better air-holding characteristics than Hypalon or PVC alternatives, contributing to superior performance in all conditions.
  • Thermal welded seam failure is virtually non-existent. Count on extended service life thanks to virtually no maintenance required on welded versus glued seams.

Specifications are estimates and are subject to varienace. More models to come!

Model: P4.2 Rescue P4.2 P4.7 P5.3 P5.8
Overall Length: 13'9"ft.
4.2m
13'9"ft.
4.2m
15'5"ft.
4.7m
17'5"ft.
5.3m
19'2"ft.
5.8m
Outside Beam: 5'7"ft.
1.73m
5'7"ft.
1.73m
6'5"ft.
1.98m
7'1"ft.
2.18m
8'1"ft.
2.48m
Internal Length: 10'9"ft.
3.27m
10'9"ft.
3.27m
12'3"ft.
3.73m
13'2"ft.
4.01m
13'9"ft.
4.2m
Internal Beam: 2'6"ft.
0.81m
2'6"ft.
0.81m
3'ft.
0.91m
3'4"ft.
1.04m
4'ft.
1.22m
Tube Diameter: 18"in.
45.7cm
18"in.
45.cm
20"in.
50.8cm
22"in.
55.9cm
25"in.
63.5cm
Number of Chambers: 3 3 5 5 5
Usable Deck Space: 27.0ft²
2.84m²
27.0ft²
2.84m²
38.32ft²
3.56m²
44.78ft²
4.169m²
54.89ft²
5.1m²
Min Floor Length: 10'8"ft.
3.28m
10'8"ft.
3.28m
12'2"ft.
3.73m
13'1"ft.
4.019m
13'8"ft.
4.229m
Craft Weight Empty: 130lbs.
59kgm
150lbs.
68kg
180lbs.
81.1kg
192lbs.
87.3kg
275lbs.
125kg
Weight w/ High Pressure Air Deck: 170lbs.
77.3kg
187lbs.
85kg
N/A N/A N/A
Weight w/ Composite Hard Deck: 223lbs.
101.3kg
240lbs.
109kg
279lbs.
126.8kg
312lbs.
141.8kg
459lbs.
208.6kg
Weight w/ Composite Roll Up Deck: 198lbs.
90kg
215lbs.
97.7kg
274lbs.
124.5kg
302lbs.
137.3kg
N/A
Folded Dimensions: 23" x 23" x 50"
63.5 x 74 x 122cm
25" x 25" x 52"
63.5 x 63.5 x 132cm
27" x 29" x 56"
68.6 x 74 x 142cm
38" x 38" x 65"
96.5 x 96.5 x 165cm
36" x 36" x 81"
91.4 x 91.4 x 205.7cm
Transom Height: 20"in.
50.8cm
20"in.
50.8cm
20"in.
50.8cm
20"in.
50.8cm
20"in.
50.8cm
Max Payload: 2,099lbs.
952kg
2,099lbs.
952kg
2,768lbs.
1,251kg
3,999lbs.
1,814kg
5,999lbs.
2,721kg
Person Capacity: 8 8 10 12 15
Max HP Rating
(Hard Deck/Roll Deck):
50/30 50/30 65/65 80/70 115 Hard Deck Only
Max Engine Weight: 242lbs.
110kg
255lbs.
115.9kg
320lbs.
145.5kg
345lbs.
156.8kg
420lbs.
190.9kg
Standard Color: Red or Black Black Black Black Black

  • D-rings for towing bridle
  • Deck drain, high capacity
  • External/Internal lifelines
  • Handles, 6 ea. side, one bow
  • Keel, inflatable with valve
  • Lifting rings (4)
  • Rub strakes on sides and keel
  • Composite transom, floorboards, and thrustboard — lighter and stronger than aluminum and impervious to detrioriation from water intrusion (won’t rot like wood)
  • Transom tow eyes
  • Auto-inflation
  • Multi-piece composite forward for more storage
  • Equipment bags
  • Dull Coat
  • 6, 9, and 18 gallon collapsible fuel bags
  • Roll-up lightweight composite deck
  • Fleet customization: For multiple boat orders watchers, shark fishermen, dive teams, and arctic explorers out there



More videos on YouTube

Wing Inflatables has spent over 30 years coming up with custom solutions

Let our team help you find your solution now